Nuclear Fusion

  • They offer some major advantages over other power sources. They will use abundant sources of fuel, they will not leak radiation above normal background levels and they will produce less radioactive waste than current fission reactors.
  • Fusion reactors are now in experimental stages at several laboratories
  • A consortium from the United States, Russia, Europe and Japan has proposed to build a fusion reactor called the International Thermonuclear Experimental Reactor (ITER) in Cadarache, France, to demonstrate the feasibility of using sustained fusion reactions for making electricity.

Isotopes

Isotopes are atoms of the same element that have the same number of protons and electrons but a different number of neutrons. Some common isotopes in fusion are:

  • Protium is a hydrogen isotope with one proton and no neutrons. It is the most common form of hydrogen and the most common element in the universe.
  • Deuterium is a hydrogen isotope with one proton and one neutron. It is not radioactive and can be extracted from seawater.
  • Tritium is a hydrogen isotope with one proton and two neutrons. It is radioactive, with a half-life of about 10 years. Tritium does not occur naturally but can be made by bombarding lithium with neutrons.
  • Helium-3 is a helium isotope with two protons and one neutron.
  • Helium-4 is the most common, naturally occurring form of helium, with two protons and two neutrons.

Also Read, What Is A Carbon Sink?

Physics of Nuclear Fusion: Reactions

  • Current nuclear reactors use nuclear fission to generate power. In nuclear fission, you get energy from splitting one atom into two atoms. In a conventional nuclear reactor, high-energy neutrons split heavy atoms of uranium, yielding large amounts of energy, radiation and radioactive wastes that last for long periods of time
  • In nuclear fusion, you get energy when two atoms join together to form one. In a fusion reactor, hydrogen atoms come together to form helium atoms, neutrons and vast amounts of energy. It’s the same type of reaction that powers hydrogen bombs and the sun. This would be a cleaner, safer, more efficient and more abundant source of power than nuclear fission.

There are several types of fusion reactions. Most involve the isotopes of hydrogen called deuterium and tritium:

  • Proton-proton chain – This sequence is the predominant fusion reaction scheme used by stars such as the sun. Two pairs of protons form to make two deuterium atoms. Each deuterium atom combines with a proton to form a helium-3 atom. Two helium-3 atoms combine to form beryllium-6, which is unstable. Beryllium-6 decays into two helium-4 atoms. These reactions produce high energy particles (protons, electrons, neutrinos, positrons) and radiation (light, gamma rays)
  • Deuterium-deuterium reactions – Two deuterium atoms combine to form a helium-3 atom and a neutron.

Deuterium-tritium reactions – One atom of deuterium and one atom of tritium combine to form a helium-4 atom and a neutron. Most of the energy released is in the form of the high-energy neutron. Conceptually, harnessing nuclear fusion in a reactor is a no-brainer. But it has been extremely difficult for scientists to come up with a controllable, non-destructive way of doing it.

Conditions for Nuclear Fusion

  • W­hen hydrogen atoms fuse, the nuclei must come together. However, the protons in each nucleus will tend to repel each other because they have the same charge (positive).
  • To achieve fusion­, you need to create special conditions to overcome this tendency. Here are the conditions that make fusion possible:
  • High temperature – The high temperature gives the hydrogen atoms enough energy to overcome the electrical repulsion between the protons.
  • Fusion requires temperatures about 100 million Kelvin (approximately six times hotter than the sun’s core).
  • At these temperatures, hydrogen is a plasma, not a gas. Plasma is a high-energy state of matter in which all the electrons are stripped from atoms and move freely about.
  • The sun achieves these temperatures by its large mass and the force of gravity compressing this mass in the core. We must use energy from microwaves, lasers and ion particles to achieve these temperatures.

High pressure – Pressure squeezes the hydrogen atoms together.

The sun uses its mass and the force of gravity to squeeze hydrogen atoms together in its core. We must squeeze hydrogen atoms together by using intense magnetic fields, powerful lasers or ion beams.

W­ith current technology, we can only achieve the temperatures and pressures necessary to make deuterium-tritium fusion possible. Deuterium-deuterium fusion requires higher temperatures that may be possible in the future. Ultimately, deuterium-deuterium fusion will be better because it is easier to extract deuterium from seawater than to make tritium from lithium. Also, deuterium is not radioactive, and deuterium-deuterium reactions will yield more energy.

Also read:Topics under Current Affairs and for UPSC IAS Prelims Exam year 2023

Fusion Reactors: Magnetic Confinement

There are two ways to achieve the temperatures and pressures necessary for hydrogen fusion to take place:

  • Magnetic confinement uses magnetic and electric fields to heat and squeeze the hydrogen plasma. The ITER project in France is using this method.
  • Inertial confinement uses laser beams or ion beams to squeeze and heat the hydrogen plasma. Scientists are studying this experimental approach at the National Ignition Facility of Lawrence Livermore Laboratory in the United States.
Image source :-howstuffworks

Here’s how the process will work:

Image source:-howstuffworks

Magnetic-confinement fusion process

  • The fusion reactor will heat a stream of deuterium and tritium fuel to form high-temperature plasma. It will squeeze the plasma so that fusion can take place.
  • The lithium blankets outside the plasma reaction chamber will absorb high-energy neutrons from the fusion reaction to make more tritium fuel. The blankets will also get heated by the neutrons.
  • The heat will be transferred by a water-cooling loop to a heat exchanger to make steam.
  • The steam will drive electrical turbines to produce electricity.
  • The steam will be condensed back into water to absorb more heat from the reactor in the heat exchanger.

Fusion Reactors: Inertial Confinement

The National Ignition Facility (NIF) at Lawrence Livermore Laboratory is exp­erimenting with using laser beams to induce fusion. In the NIF device, 192 laser beams will focus on single point in a 10-meter-diameter target chamber called a hohlraum. A hohlraum is “a cavity whose walls are in radiative equilibrium with the radiant energy within the cavity

At the focal point inside the target chamber, there will be a pea-sized pellet of deuterium-tritium encased in a small, plastic cylinder. The power from the lasers (1.8 million joules) will heat the cylinder and generate X-rays. The heat and radiation will convert the pellet into plasma and compress it until fusion occurs. The fusion reaction will be short-lived, about one-millionth of a second, but will yield 50 to 100 times more energy than is needed to initiate the fusion reaction. A reactor of this type would have multiple targets that would be ignited in succession to generate sustained heat production. Scientists estimate that each target can be made for as little as $0.25, making the fusion power plant cost efficient.

Like the magnetic-confinement fusion reactor, the heat from inertial-confinement fusion will be passed to a heat exchanger to make steam for producing electricity.

The National Ignition Facility (NIF) at Lawrence Livermore Laboratory is exp­erimenting with using laser beams to induce fusion. In the NIF device, 192 laser beams will focus on single point in a 10-meter-diameter target chamber called a hohlraum. A hohlraum is “a cavity whose walls are in radiative equilibrium with the radiant energy within the cavity

At the focal point inside the target chamber, there will be a pea-sized pellet of deuterium-tritium encased in a small, plastic cylinder. The power from the lasers (1.8 million joules) will heat the cylinder and generate X-rays. The heat and radiation will convert the pellet into plasma and compress it until fusion occurs. The fusion reaction will be short-lived, about one-millionth of a second, but will yield 50 to 100 times more energy than is needed to initiate the fusion reaction. A reactor of this type would have multiple targets that would be ignited in succession to generate sustained heat production. Scientists estimate that each target can be made for as little as $0.25, making the fusion power plant cost efficient.

Like the magnetic-confinement fusion reactor, the heat from inertial-confinement fusion will be passed to a heat exchanger to make steam for producing electricity.

Applications of Fusion

  • ­The main application for fusion is in making electricity. Nuclear fusion can pro­vide a safe, clean energy source for future generations with several advantages over current fission reactors:
  • Abundant fuel supply – Deuterium can be readily extracted from seawater, and excess tritium can be made in the fusion reactor itself from lithium, which is readily available in the Earth’s crust. Uranium for fission is rare, and it must be mined and then enriched for use in reactors.
  • Safe – The amounts of fuel used for fusion are small compared to fission reactors. This is so that uncontrolled releases of energy do not occur. Most fusion reactors make less radiation than the natural background radiation we live within our daily lives.
  • Clean – No combustion occurs in nuclear power (fission or fusion), so there is no air pollution.
  • Less nuclear waste – Fusion reactors will not produce high-level nuclear wastes like their fission counterparts, so disposal will be less of a problem. In addition, the wastes will not be of weapons-grade nuclear materials as is the case in fission reactors.
  • ­NASA is currently looking into developing small-scale fusion reactors for powering­ deep-space rockets. Fusion propulsion would boast an unlimited fuel supply (hydrogen), would be more efficient and would ultimately lead to faster rockets.

Read More:BIO-FUELS

1 Comment

  1. Its such as you learn my thoughts! You seem to understand a lot approximately this, such as you wrote the book in it or something. I believe that you simply could do with a few p.c. to force the message home a little bit, however other than that, that is excellent blog. An excellent read. I will definitely be back.

Leave a Reply

Your email address will not be published. Required fields are marked *